Connecting To A Dvd Player - NEC MultiSync LCD4010 Manuel Utilisateur

Connections
Connecting your DVD player to your LCD monitor will enable you to display your DVD video.
Refer to your DVD player's owner's manual for additional information.
• To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need a
BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
Some DVD players may have different connectors, such as DVD/HD connector (Y, Cb/Pb and Cr/Pr).
Select [DVD/HD] input mode from the INPUT button.
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the AUDIO
INPUT button.
• Mode selection see "DVI MODE" of page 25.
Denotes an AV unit function.
AV
All AV functions are enabled when the AV unit is installed.
–continued

Connecting to a DVD Player

English-16
AV