Preparing The Mower For Long-Term Storage; Technical Data - Einhell Royal BM 51-S Instructions De Montage Et Mode D'emploi

Anleitung BM 51_S_SPK1 17.01.2006
8. Times of use
Lawn mowers are only permitted to be used on
workdays between the hours of 7.00 a.m. and 7.00
p.m. Please comply with statutory regulations, which
may vary from location to location.
13. Preparing the mower for long-term
storage
Caution: Do not empty the petrol tank in enclosed
areas, near fire or when smoking. Petrol fumes can
cause explosions and fire.
1. Empty the petrol tank with a petrol suction pump.
2. Start the engine and let it run until any remaining
petrol has been used up.
3. Change the oil at the end of every season. To do
so, remove the used engine oil from a warm
engine and refill with fresh oil (see Changing the
oil, item 12/4).
4. Remove the spark plug from the cylinder head.
Fill the cylinder with approx. 20 ml of oil from an
oil can. Slowly pull back the starter handle, which
will bathe the cylinder wall with oil. Screw the
spark plug back in.
5. Clean the cooling fins of the cylinder and the
housing.
6. Be sure to clean the entire machine to protect
the paint.
7. Store the machine in a well-ventilated place.
14. Preparing the mower for
transportation
1. Empty the petrol tank (see item 13/1).
2. Always let the engine run until it has used up the
remainder of petrol in the tank.
3. Empty the engine oil from the warm engine.
4. Remove the spark plug boot from the spark plug.
5. Clean the cooling fins of the cylinder and the
housing.
6. Remove the start tension cable from the hook
(Fig. A/6). Slacken the wing nuts and fold down
the upper push bar (Fig. T).
7. Wedge a few layers of corrugated cardboard
between the upper and lower push bars and the
engine in order to prevent any chafing.
13:11 Uhr Seite 23

15. Technical data

Engine type:
Single cylinder four-stroke engine, 168 ccm
Engine power: 3.7 kW/5 HP
Working speed: 2700 min
Fuel: Lead-free standard petrol
Tank capacity: approx. 1.8 l
Petrol filling level: approx. 1.6 l
Engine oil: approx. 0.4 l / 15W40
Spark plug:
Electrode spacing: 0.5 – 0.6mm
Cutting height adjustment: central (28 - 85mm)
Cutting width: 510 mm
LWM sound pressure level: 95 dB(A)
LWA sound power level: 98 dB(A)
Weight:
GB
-1
F7TC
43 kg
23