Assembly - Unold SILVERLINE WHITE Notice D'utilisation

ASSEMBLY

1 Front basket cover
1 a Fastening ring
2 Impeller
3 Guard lock nut
4 Rear basket cover
5 Axle
6 Oscillation button
7 Motor housing
8 Base
9 Switch
1. Before assembling, ensure that you are assembling the appliance on a level,
dry, place.
2. Remove all packaging materials and transport safeguards. Keep the packag-
ing material, such as plastic bags or Styrofoam away from small children
- danger of suffocation!
3. Check whether all needed parts are present.
4. Pull the supply line of the motor housing through the opening in the base.
5. Fix the base and motor housing in place by firmly turning the motor housing
clockwise, until the motor housing audibly locks in place (tab on the motor
housing and recess must be properly fitted into each other).
6. Remove guard lock nut from the motor shaft spindle.
7. Fasten the rear basket cover by fixing the cover in place with the nut.
8. Place the impeller on the axle on the motor housing. Check whether the fan
blades move freely.
16
Copyright UNOLD AG | www.unold.de
1
2
4
3
1 a
9
5
6
7
8