Technical Data - Sennheiser MKE 44 P Notice D'emploi

MKE 44 P STEREO CONDENSER MICROPHONE
Permanently polarized condenser microphone incorporating two microphone
capsules (cardioid pick-up pattern), offset by 9 0°, for XY stereo recordings.
• Stereo microphone; easy-to-handle, even outdoors
• Independent of mains power supply,
phantom-powered or battery-operated
• User-friendly: instructions and wiring diagram on the handle
• 3-pin XLR compatible, delivery includes an
adapter/connecting cable
• Two-step bass switch to optimize the microphone´s
frequency response
• High quality wind-shield

TECHNICAL DATA

Pick-up pattern
Frequency response
Sensitivity (free field, no load)
S/N ratio acc. to DIN 45 405
Impedance
Min. load impedance
Plug
Cable
Power supply
Max. operating time with one battery
Weight
Delivery includes:
Recommended accessories:
Subject to alterations.
2 x cardioid
40 - 20,000 Hz
6.3 mV/Pa ± 2.5 dB
> 58 dB
2 x > 250 Ω
1 kΩ
5-pin XLR, delivery includes
a 2 x 3-pin XLR adapter cable
1.5 m adapter/connecting cable
1.5 V Mignon LR 06 or phantom
power supply (12 V - 48 V),
without changing over
approx. 1,000 hrs
125 g
1 microphone
1 adapter/connecting cable
1 windshield
1 case with foam insert
- MZQ 43 quick-release clamp
with table stand
- SEMS 3135 microphone stand
with boom arm