Recommended Accessories; Technical Data - Sennheiser MD 22 Notice D'emploi

MD 22 DYNAMIC MICROPHONE
High-quality hand-held microphone with omni-directional pick-up pattern.
Designed for rugged routine use in radio and TV reporting. Easy to handle
- the special design minimises wind and handling noise.
CHARACTERISTICS
• excellent speech clarity due to optimised frequency response.
• heavy duty special fiberglass casing.
• even inexperienced users can achieve good recording results.

RECOMMENDED ACCESSORIES

• Quick release clamp MZQ 200, Cat. No. 03289.
• Windshield MZW 22 (black), Cat. No. 04209.
• Windshield MZW 65 PRO (black, velours-covered), Cat. No. 03757.
Other colours and imprints are available on request, please order at
your local Sennheiser dealer.

TECHNICAL DATA

Acoustic principle
Frequency response
Pick-up pattern
Sensitivity (free field, no load) at 1 kHz
Nominal impedance at 1 kHz
Min. terminating impedance
Connector
Dimensions / weight
Supply schedule
Subject to alterations
(NOT INCLUDED IN THE SUPPLY SCHEDULE)
pressure microphone
40 - 18,000 Hz
omni-directional
2.0 mV/Pa ± 2.5 dB (= -54 dBV)
250 Ω
200 Ω
3-pin XLR connector (Neutrik)
Ø 38 mm, length 201 mm / approx. 165 g
MD 22 microphone