Maintenance And Care - Stihl HSE 41 Notice D'emploi

Maintenance and Care

The following intervals apply to normal operating conditions only. If your daily working
time is longer or operating conditions are difficult (very dusty work area, etc.), shorten the
specified intervals accordingly.
Complete machine
Two-hand control
Cooling inlets
Cutting blades
Gearbox
All accessible screws and nuts
Safety labels
1)
STIHL recommends a STIHL servicing dealer.
2)
Spray with STIHL resin solvent after cleaning
HSE 41, HSE 51
Visual inspection (condition)
Clean
Check function – blades must quickly
come to a standstill when the trigger switch
or front switch lever is released
Visual Inspection
Clean
Visual Inspection
2)
Clean
1)2)
Sharpen
1)
Have replaced by dealer
1)
Have checked by servicing dealer
every 50 hours of operation
Have gearbox topped up with STIHL gear
1)
lubricant by servicing dealer
Retighten
Replace
X
X
X
X
X
X
after
English
X
X
X
X
X
X
31