Service Instructions - Meister FP80M Traduction Du Manuel D'utilisation Original

1. Empty any paint still in the paint tank.
2. Clean the tank thoroughly with the
thinner used.
3. Pour some thinner into the tank and
spray with the spray gun until only
pure thinner comes out of it.
4. Clean the intake tube and the filter
with thinner.
5. Clean the basket and nozzle, and
remove any dirt and paint remaining
6. Place the spray gun on its head and
pour a few drops of sewing machine
oil into the two openings (see Fig. 7).
7. Briefly switch on the spray gun.
8. Keep the appliance's venting slots clean
to prevent the motor overheating.
Clean the housing regularly with a soft
cloth, best after use. The venting slots
must be free of dust and dirt.
Should the dirt not be removed, use
a soft cloth moistened with soapy
water. Never use a solvent such as
benzene, alcohol, ammoniac. These
solvent may attack the parts made of
plastic.
CAUTION! Electrical and battery
operated units that no longer
work should not be disposed of in
the household waste! They are to be
collected separately, in accordance
with the 2012/19/
EU directive for the
disposal of electrical
and electronic waste,
and sent for proper and
environmentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
48
5412950-Farbspritzgeraet_man.indd 48 5412950-Farbspritzgeraet_man.indd 48
10 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to
our servicing address. The repairs will
be carried out in a short time.
• A brief description of the defect
speeds up the faulttracing and
repair time. If within the guarantee
period, please enclose the guarantee
document and the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim.
IMPORTANT! We point out
expressly that in accordance
with the Product Liability Act we
do not take responsibility for any
damage caused by our appliances,
in so much that said damage is
caused by improper repair, or original
parts or parts released by us not
being used when parts are changed,
or repairs not being conducted by
Conmetall Meister GmbH, Customer
09.07.20 11:38 09.07.20 11:38