Meister FP80M Traduction Du Manuel D'utilisation Original page 42

radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f If it is not possible to avoid using
the electrical tool in a damp
environment, use a residual current
circuit-breaker. The use of a residual
current circuit-breaker reduces the
risk of an electrical shock.
3 Personal safety
a Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication. A moment
of inattention while operating power
tools may result in serious personal
injury.
b Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
masks, non-skid safety shoes, hard
42
hat, or hearing protection used for
5412950-Farbspritzgeraet_man.indd 42 5412950-Farbspritzgeraet_man.indd 42
appropriate conditions will reduce
personal injuries.
c Prevent unintentional starting.
Ensure the switch is in the off­
position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energising power
tools that have the switch on invites
accidents.
d Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
e Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g Keep the handles dry, clean and
free from oil and grease. Greasy,
oily handles are slippery and will lead
to a loss of control.
h If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust
related hazards.
4 Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
09.07.20 11:38 09.07.20 11:38