Safety Instructions Relating Specifically To The Equipment - Meister FP80M Traduction Du Manuel D'utilisation Original

will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5412950-Farbspritzgeraet_man.indd 43 5412950-Farbspritzgeraet_man.indd 43
5 Service
a Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
6 – Safety instructions
relating specifically to
the equipment
• Do not point the jet spray at people or
animals! In case of injury, immediately
consult a specialist doctor.
• Do not operate an empty spray gun.
Pressure may lead to people or
animals coming to harm.
• Never block the discharge nozzles
of the spray gun with your body or
parts of the body. The high discharge
pressure might lead to sensitive
injuries.
• Never allow paint in the gun or tank
to start drying! Dried-on residual paint
will affect how the discharge nozzle
functions and may lead to the warranty
claim being lost.
• Never use solids-polluted liquids with
this tool, such as liquids with high fibre
or particle content, metallic paints,
fire-protection paints or liquids with
asebstos particles.
• Do not use highly inflammable liquids.
Always ensure adequately ventilated
surroundings! Always observe the
package insert of the particular
materials concerned provided by the
manufacturers!
• Do not use the spray gun outside
closed rooms when it is raining!
43
09.07.20 11:38 09.07.20 11:38