Checks And Maintenance; Lister Petter 10 & 32 Checks & Maintenance Schedule - Altrad Belle PREMIER XT Manuel De L'opérateur

GB
To help assist engine running-in, all engines are despatched with an initial ll lubricating
oil which must be changed after 100 hours.
All subsequent oil changes must be as speci ed below.
Lister-Petter 32 & 10 Engines
Check the fuel & lubricating oil levels
Check for oil & fuel leaks
Clean, or replace, the air cleaner element under very dusty conditions
Check the condition of the battery, if tted
Clean or replace the air cleaner element under moderately dusty conditions
Drain the sump and re ll with new oil of the correct type and speci cation as given in
engine handbook
Clean or replace the injectors if the exhaust is dirty
Renew the fuel lter element if the fuel being used is not perfectly clean
Replace the air cleaner element
Examine exhaust & induction systems for leaks, damage or restrictions
Renew the fuel lter element
Check the battery charge winding system; refer to Workshop Manual
Check the valve clearances
Decarbonise if the engine performance has deteriorated
Clean the cylinder barrel and head ns
Clean the banjo union at the cylinder head end of oil feed pipe
Drain, ush and re ll the fuel tank
Mixer
Grease Yoke Pivot
Grease Tipping Gear (10 Operations of Grease Gun)
Remove Drum and Grease Shaft
Check Nuts and Bolts
Check Gearbox Oil
Check Components for Leaks

Checks and Maintenance

14
Daily 50 250
Hours Hours
500 1000
Hours Hours