LaserLiner SuperSquare-Laser 2G Mode D'emploi page 9

2 On-floor applications
Turn on the unit with the ON / OFF
switch (1). The laser lines now produce
2 marks at 90° angles on the floor.
These projected lines allow tiles to be
laid easily, yet precisely. The 90° lay
edge (4) and the contact surface (5)
make it easy to align the first floor tile.
Green laser technology
3
Wall applications
Mount the device on the wall for horizontal and vertical
levelling. Then align the device with the vials.
4 Mounting on the wall
1. Place device on the wall.
2. Push the special pins through
the appropriate holes.
!
Regularly check the calibration before use, after
transport and after extended periods of storage.
SuperSquare-Laser 2G
Devices with the PowerGreen+ technology have
very bright, green high-performance diodes
which provide outstanding visibility of the laser
lines at great distances, on dark surfaces and in
bright ambient lighting conditions.
Approx. 6 times brighter than a typical red laser
with 630 - 660 nm.
09
EN