Installation; Checks; Installation Of The Power Unit; Summary - Simco-Ion A Unit Mode D'emploi

Figure 2: Graph showing maximum load for type A power unit

5 Installation

Warning:
- Installation shall be carried out by a skilled electrical engineer.
- Disconnect the power supply before carrying out work on the unit.

5.1 Checks

- Check that the power unit is undamaged and that you have received the correct version.
- Check that the data on the packing slip correspond with the data shown on the product
received.
- Check that the voltage shown on the rating plate corresponds with the mains voltage.
If you have any problems and/or in the case of ambiguity:
Please contact Simco-Ion or your regional agent.

5.2 Installation of the power unit

5.2.1 Summary

Install the power unit in the position you like within the range of the connection leads of the
ionisation equipment.
Install the power unit in such a way that the switch and indicator lamp are clearly visible and
easily accessible.
It is recommended that the power unit is switched on/off via the machine.
Important:
- Make sure that the equipment is properly earthed. Earthing is needed to ensure
proper operation and to avoid electrical shocks upon contact.
A-Unit_UM_9752080510_NL_D_GB_F_V3_4
GB
43