DE EN
8
Dismantling
1.
Disconnect the valve from the mains power
supply, if necessary.
2.
Shut off the lines.
3.
Remove the servo drive, if necessary.
4.
Loosen the screw fittings and remove the
valve from the lines.
9
Order No.
4712701500
6150000100
6160000100
6170G01500
+
28 /72 – K410061500001-00 / 09.2021– © www.kemper-olpe.de
Dismantling and disposal
Spare parts and accessories
Disposal
Observe the local regulations on
waste disposal and waste recycling.
Do not dispose of the product
with the normal household waste;
dispose of it correctly.
Spare part/accessory
Insulating shell (accessory)
230 V servo drive (spare part)
24 V servo drive (spare part)
KHS CoolFlow Cold water regulating valve
without actuator
Insulating
An insulating shell is available as an accessory to
prevent energy losses, formation of condensation
and microbial contamination.