Safety Instructions - Kemper KHS CoolFlow Mode D'emploi

Safety instructions

Safety instructions
Please observe and follow the safety instructions
in the manual. Failure to observe the instructions
may result in injury or even death and in damage
to property.
Labelling of important warning information:
Danger!
Indicates hazards that may result in
severe or fatal injury.
Warning!
Indicates hazards that may result in
injury, damage to property or
contamination of the drinking water.
Note!
Indicates hazards that may result in
damage to the system or malfunctions.
Sources of danger
Danger!
Danger of fatal electric shock!
Disconnect the system from the power
supply before carrying out work.
Warning!
Risk of injury due to improper installation!
Installation and maintenance may only
be carried out by a plumbing specialist.
Warning!
Health hazard from residues in lines!
Always flush the supply lines in
accordance witT DIN EN 806-5 and
VDI/DVGW 6023 after carrying out
installation and maintenance work
(see section 7, illustration 1-2).
Note!
Risk of equipment damage from
excessive temperatures during thermal
disinfection!
Remove the regulating valve with
carrying out thermal disinfection and
insert a fitting.
During installation, observe:
DIN EN 806 | DIN EN 1717 | DIN 1988
© www.kemper-olpe.de – 09.2021 / K410061500001-00 – 17 /72