KEMPER AirWatch operating instructions - EN
4 Access to the Internet
For perfect functioning, AirWatch needs access to the Internet. The dependent
functions are:
4.1 Time and date
Time, time zone and date are synchronized via an online service. This is necessary
for correct functioning of the long term analysis.
4.2 Software update
We extend the AirWatch software and provide you with free updates via the Internet.
As these are loaded automatically on to the AirWatch via the Internet and are
installed in the background, we advise urgently that the device is granted continuous
access to the Internet. The update is loaded via a secure VPN connection.
4.3 Firewall
If the device is not behind a firewall, then you must activate the following network
points in your firewall. To do this, please contact a system administrator or take the
relevant instructions from your router/your firewall manual.
Service: NTP (Network Time Protocol)
Port: 123
Service: VPN (Virtual Private Network)
Port: 443
Part no.: 150 2608
- 58 -
Rev.: 00
Issue: 03/2017
All rights over changes without prior notice and errors reserved.