Bycool COMPACT 1.4 Instructions De Montage page 24

COMPACT 1.4
EN
1- Lead equipment power cable up to the vehicle´s battery, gluing plastic supports on rear cabin side and
fastening it with flanges. Once cabin has been folded, lead cable along lower cabin side, fastening
it with clamps and M4 screws and up to battery with flanges. It must follow the same passage as
original cable (thoroughly clean the area before gluing plastic supports). When connecting equipment
to battery, it will carry out a test of all its leds, bd will show on the display and it will then be turned off.
IMPORTANT: Due to the complex electronic control system of the unit, the current supply
connection must be made directly to the battery, not to any other existing point available to feed
other vehicle accessory or appliance, taking care of not changing polarity (2). Should polarity be
inverted, electronic system of the unit could irreversebly be damaged.
IMPORTANT: Please consult User's Guide before starting.
Detailed instructions
on power wiring assembly
Wiring
1
supply
2
+
24
Air conditioning for vehicles
2
-