Bycool COMPACT 1.4 Instructions De Montage page 20

COMPACT 1.4
EN
To place the front (at the previous
11
mentioned) spigots with (1) washer M6
wide wing and (1) nut M6 in each spigot.
To tight nuts til the rubber ducting til run
into the upper rubber of the unit.
Important: The rubber ducting must
being run into the upper rubber of the
unit to avoid air leaks.
11
EPDM
Gasket
Cabin roof
Upholstey
Tighten nut mentioned under point 10a until
12
it touches upper surface of front.
12
EPDM
Gasket
Cabin roof
Upholstey
Unit base
Nut M6
Stud M6
Unit base
Nut M6 (10a)
Nut M6
Stud M6
Rubber ductings
Rubber ductings
20
Air conditioning for vehicles
Foam Gasket
front with louvers
Foam Gasket
front with louvers