gdw 1431 Instructions De Montage page 5

Citroën C3 Pluriel
2003 - ....
Ref. 1431
Fitting instructions
1) Loosen the bumper underneath, remove the tape which seales the screw-thread holes on the outside of the
chassis beam.
2) Place the mounting pieces (1) and (2) with the points (A) on the freed drillings (after having removed the
tape) and insert the bolts without tightening.
3) Make an incision in the underside of the bumper as on drawing enclosed.
4) Place now the tow bar with points (B) between both mounting plates so that the drillings come to match
with each other. Insert the bolts and screw everything tight.
5) Refix the bumper at the bottom of the vehicle. Assemble the ball type 45 or the pedestal of the
escamotable system together with the security shackle and the socket holder. Insert the bolts and screw
everything tight. For the working of the escamotable system, see fitting instruction which is delivered
with the T36.
Composition
Tow bar reference 1431
4 bolts M12x70 - DIN931
4 security nuts M12 - DIN985
2 mounting slices T45
1 security shackle (-s) (800053)
2 tubes
1 socket holder P04
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
4 bolts M10x30 - DIN933
(*-*') 4 security washers M10 - DIN128A
(*) 4 bolts M12x35 - DIN933
(*) 4 nuts M12 - DIN934
(*')
4 security washers M12 - DIN128A
(*) 1 mounting piece left (1)
(*')
1 mounting piece right (2)
All bolts and nuts : quality 8.8
(A)
(A)
(B)
(B)
(B)
(A-B)
(A-B)