Operation; System Settings - Albrecht Audio DR 900 BT Mode D'emploi

The radio is now ready to be paired to your Bluetooth device. Please activate the Bluetooth
connection on your unit and search for visible Bluetooth devices. You will find the DR 900 BT.
Normally you can connect to the radio by clicking on the name. For more detailed information on
how to handle the pairing process on your Bluetooth device please take a look at the user manual.
After the pairing has been finished successfully you can start streaming music by simply opening
the media player and playing music.
Note: The volume can be controlled on the radio and on your Bluetooth device separately. So if the
volume is muted on one of the units you won't hear anything. We recommend turning the volume to
a low level on both units and then you start increasing the volume as desired.

9.2 Operation

After the radio has been paired to a device it will start searching for known devices each time the
Bluetooth mode is entered. If a device is found, the radio will automatically connect to it.
Note: If the connected device leaves the Bluetooth range the LED will start blinking and will be
waiting for the device to return for about 10 minutes. If it returns within this time span it is
automatically re-connected. During that time no other device can be paired to the radio. If you want
to connect another device you either need to restart the radio or you need to leave the Bluetooth
mode at first and then enter it again. Then you need to follow what's described in the Setup chapter
again.

10 System Settings

Software
Upgrade
SW Version
Factory Reset
Language
Sleep
Equaliser
Backlight
English
Time and
Date
27