•
Pin
DR 890 CD generates an 8-digit code number which you enter into the wireless router, access
point, or an external registrar.
•
Skip WPS
Enter key as for a standard encrypted network. See point 2
For more information on setting up a WPS encrypted network, see your WPS router's instructions.
4. Completion
DR 890 CD attempts to connect to the selected network. It will show connected if the setup is
successful. If connecting fails, DR 890 CD returns to a previous screen to try again.
Press the navigation knob or OK on the remote control to quit the setup wizard.
13.2.2. PCB WLAN Setup
Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi Protected Setup).
13.2.3. View Settings
View the information of current connected network: Active connection, MAC address, WLAN region,
DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and Secondary DNS.
WPS Setup
Push WPS button
at the other end
Press SELECT to continue
WPS Setup
Enter PIN
98467583 at the
other end
Press SELECT to continue
Setup wizard
Setup wizard
completed
Press SELECT to exit
English
EN
49