Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Preview Settings
The Preview Settings determine which input source to show on the preview display, and through the
PREVIEW HDMI output. There are two ways to select the preview source: with the buttons on the front
panel of the VIP Drive 43Nova, or through the menu.
To select the preview source with the buttons, press <HDMI>, <DVI>, or <HD-SDI> once.
To select the preview source through the menu:
1.
Access the
Advanced Settings
2.
Turn the <MENU/ENTER> knob until Preview Settings is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select from HDMI, DVI, SDI, or
Monitor (preview display will show what is being output to connected panel assembly).
5.
Press the <MENU/ENTER> knob.
Redundancy
The Redundancy function allows a VIP Drive 43Nova to be set as either Primary or Backup and connected
to the same panel assembly. Should the Primary product fail, the Backup will take over and continue to
output video.
1.
Access the
Advanced Settings
2.
Turn the <MENU/ENTER> knob until Redundancy is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> clockwise or counter-clockwise to select either Primary or Backup.
5.
Press the <MENU/ENTER> knob.
Factory Reset
To reset the VIP Drive 43Nova to factory default settings:
1.
Access the
Advanced Settings
2.
Turn the <MENU/ENTER> knob until Factory Default is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select either No or Yes.
5.
Press the <MENU/ENTER> knob.
Presettings
The VIP Drive 43Nova has the ability to save and recall up to 10 complete settings configurations. To save,
access, or delete any of these presettings:
1.
Access the
Advanced Settings
2.
Turn the <MENU/ENTER> knob until Presettings is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> clockwise or counter-clockwise to select a presetting, from
Presettings 1–10.
5.
Press the <MENU/ENTER> knob.
6.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select from Save (saves
current settings configuration to the selected presetting), Apply (configures all settings to match
the selected presetting), or Delete (to clear the selected presetting of all configurations).
7.
Press the <MENU/ENTER> knob.
Button Customization
The <SCALE/OUTPUT> button and the <MAP> button can be configured to either black out the
connected panel assembly or freeze the video output.
1.
Access the
Advanced Settings
2.
Turn the <MENU/ENTER> knob until Custom Button is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select either SCALE or MAP.
5.
Press the <MENU/ENTER> knob.
6.
For:
•
SCALE, Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select from
SCALE, Black Out, or Freeze.
•
MAP, Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select from MAP,
Black Out, or Freeze.
7.
Press the <MENU/ENTER> knob.
25
menu.
menu.
menu.
menu.
menu.
VIP Drive 43Nova User Manual Rev. 3
O
PERATION
Publicité
Table des Matières
