Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PIP Crop Horizontal Offset
The PIP Crop Horizontal Offset selects how far to the right in the input video to display, without altering the
dimensions of the PIP itself on the connected panel assembly.
1.
Access the
PIP Crop
2.
Turn the <MENU/ENTER> knob until Start X is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
offset, from 0–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
The
PIP Crop Width
only be able to be set as much as the difference between the current PIP Crop Width
and the maximum PIP Crop Width. For example: If the maximum Width is 1920, and
the current Width is set to 1020, the offset can be set from 0–900.
PIP Crop Vertical Offset
The PIP Crop Vertical Offset selects how far down in the input video to display, without altering the
dimensions of the PIP itself on the connected panel assembly.
1.
Access the
PIP Crop
2.
Turn the <MENU/ENTER> knob until Start Y is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
offset, from 0–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
The
PIP Crop Height
only be able to be set as much as the difference between the current PIP Crop
Height and the maximum PIP Crop Height. For example: If the maximum Height is
1080, and the current Height is set to 680, the offset can be set from 0–400.
Image Mosaic
The Image Mosaic function allows multiple VIP Drive 43Nova products to each output a section of the
same video input onto a panel assembly that is too large for a single VIP Drive 43Nova. Scaling must be
enabled for Image Mosaic to function. To access the Image Mosaic menu:
1.
Access the
Advanced Settings
2.
Turn the <MENU/ENTER> knob until Image Mosaic is selected.
3.
Press the <MENU/ENTER> knob.
To enable or disable Image Mosaic:
1.
Set
Scaling
to Enable. (Setting Scaling to Disable automatically sets Image Mosaic to
Disable.)
2.
Set
Auto Fit
to Disable.
3.
Access the
Image Mosaic
4.
Turn the <MENU/ENTER> knob until Image Mosaic is selected.
5.
Press the <MENU/ENTER> knob.
6.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select Enable or Disable.
7.
Press the <MENU/ENTER> knob.
The VIP Drive 43Nova does not signal link for HDMI, DVI, or SDI. Video signals that
will be input to multiple products must be split from the source.
Total Width in Pixels
The Total Width in Pixels defines the width of the entire connected panel assembly.
1.
Access the
Image Mosaic
2.
Turn the <MENU/ENTER> knob until Total Width Pixels is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the total
width in pixels, from 128–24576.
5.
Press the <MENU/ENTER> knob.
23
menu.
must be less than maximum to use this setting. The offset will
menu.
must be less than maximum to use this setting. The offset will
menu.
menu.
menu.
PIP Crop
Width)
PIP Crop
Height)
VIP Drive 43Nova User Manual Rev. 3
O
PERATION
Publicité
Table des Matières
