Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
O
PERATION
Output Settings
The output settings determine the area and offset of the video output. To access the Output Settings menu:
1.
Press <MENU> or the <MENU/ENTER> knob to access the main menu.
2.
Turn the <MENU/ENTER> knob until Output Settings is selected.
3.
Press the <MENU/ENTER> knob.
Scaling
Enabling scaling allows the video output to be fitted more specifically to the size of the connected panel
assembly. This also allows options such as Auto Fit and Image Mosaic to be enabled.
1.
Access the
Output Settings
2.
Turn the <MENU/ENTER> knob until Scaling is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select Enable or Disable.
5.
Press the <MENU/ENTER> knob.
Auto Fit
The Auto Fit function automatically fits the video output to the connected panel assembly, based on the
Screen Settings and Input Settings. There are two ways to enable Auto Fit. If set as default, pressing
<SCALE/OUTPUT> enables or disables both Scaling and Auto Fit (see
or disable Auto Fit through the menu:
1.
Set
Scaling
to Enable.
2.
In the
Output Settings
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to select Enable or Disable.
5.
Press the <MENU/ENTER> knob.
Custom Scaling
The Custom Scaling settings determine the dimensions and offset for the section of the input to be
displayed, and the dimensions and offset for the output to the connected panel assembly. To access the
Custom Scaling menu:
1.
Access the
Output Settings
2.
Set
Scaling
to Enable.
3.
Set
Auto Fit
to Disable.
4.
Turn the <MENU/ENTER> knob until Custom Scaling is selected.
5.
Press the <MENU/ENTER> knob.
Input Capture
The Input Capture settings define what area and where in the video input to capture for output to the
connected panel assembly. To access the Input Capture menu:
1.
Access the
Custom Scaling
2.
Turn the <MENU/ENTER> knob until Input Capture is selected.
3.
Press the <MENU/ENTER> knob.
Input Source
The Input Source is set by the top row of buttons on the front panel of the VIP Drive 43Nova. Press
<HDMI>, <DVI>, or <HD-SDI> twice to set the Input Source.
Input Capture Width
The Input Capture Width defines the width in pixels to be captured from the selected video source.
1.
Access the
Input Capture
2.
Turn the <MENU/ENTER> knob until Width (H) is selected.
3.
Press the <MENU/ENTER> knob.
4.
Turn the <MENU/ENTER> knob clockwise or counter-clockwise to increase or decrease the
width, from 64–_ _ _ _. (This range is determined by the
5.
Press the <MENU/ENTER> knob.
VIP Drive 43Nova User Manual Rev. 3
menu.
menu, turn the <MENU/ENTER> knob until Auto Fit is selected.
menu.
menu.
menu.
Button
Customization). To enable
Input
Settings)
16
Publicité
Table des Matières
