Hameg Instruments HM8021-4 Manuel page 16

H M 8 0 2 1- 4
Mainframe HM8001-2
required for Operation
HZ33, HZ34
Test Cable BNC/BNC
16
Subject to change without notice
1.6 G H z U n i v e r s a l C o u n t e r
1, 6 G H z U n i v e r s a l C o u n t e r
Frequency range 0 Hz to 1.6 GHz
R Measurement Range 0 H z...1.6 G Hz
10 MHz time base with 0.5 ppm stability (TCXO)
R 10 M Hz Time Base with 1 p pm Stability (TCXO)
R I nput A: Input Impedance 1 M Ω, Sensitivity 20 m V
Input A:
Input C: Input Impedance 50 Ω , Sensitivity 30 m V
Input impedance 1 MΩ, maximum sensitivity 20 mV
8-Digit Resolution for 10 s Measuring Time
Input C:
R Time Interval Resolution up to 10 p s
Input impedance 50 Ω, maximum sensitivity 30 mV
R External Gate Input (with Option HO801)
Time interval resolution up to 10 ps
Offset mode over the entire measurement range
Gate input (in combination with HO801)
H M 8 0 2 1 - 4
H M 8 0 2 1- 4
rms
rms rms
rms