Emerson Appleton EHLED Instructions D'installation Et D'entretien page 6

Globe & Guard Assembly or Lamp Replacement Instructions (Continued)
3. Ensure that the EHLED handlamp is unplugged, then place into the jig as shown below.
FIGURE 6: EHLED HANDLAMP INSERTED INTO jIG
4. With the handlamp guard seated firmly in the Guard Housing Jig, use the Wrench Tool to rotate the handlamp's handle
COUNTER-CLOCKWISE until the handle separates from the handlamp guard.
FIGURE 7: TURN THE WRENCH TOOL COUNTER-CLOCKWISE TO REMOvE HANDLE
Appleton • 1.800.621.1506 • www.appletonelec.com DOC00038A000 Rev. 00 02/13/20 MY6381 • Page 6 of 16