Emerson Appleton EHLED Instructions D'installation Et D'entretien page 2

A. Dimensions
B. Guard
C. Hook
D. Globe
E. Lamp
F. Lamp Socket
G. Phenolic Handle
H. Power Cord
I. Nameplate
C
Appleton • 1.800.621.1506 • www.appletonelec.com
Product Features - Refer to Figure 1
The overall length is 20" (508mm). Outside diameter is 4-7/8" (124mm).
The guard is made of non-sparking cast aluminum.
The non-sparking metal hook is located on the outer end of the guard.
The hook shall swivel and fit over a 3/4" (19mm) pipe.
The globe is made of high-impact, heat-resistant, tempered clear glass.
Acceptable wattage for bulbs/lamps are 75W or 100W (depending on handlamp model).
The lamp socket is designed to accomodate a standard E27 incandescent bulb.
The handle is made from chemical-resistant phenolic resin.
Flexible SO-type (or similiar) cord rated at 600 volts. 16/3 or 14/3 conductors.
The plug, if provid ed, shall be listed for use in at least Class I, Groups C and D Hazardous Locations
and suitable for use with the above cords having a grounding conductor.
The UL label includes listing information and relamping instructions.
E
D
B
FIGURE 1: EHLED PRODUCT FEATURES
F
A
DOC00038A000 Rev. 00 02/13/20 MY6381 • Page 2 of 16
G
I
H