Restricting Vertical Vents; Top View - Napoleon B36NTR Instructions D'installation Et D'opération

4.3.3 RESTRICTING VERTICAL VENTS

TURN OFF GAS AND ELECTRICAL SUPPLY BEFORE SERVICING THE APPLIANCE.
APPLIANCE MAY BE HOT, DO NOT SERVICE UNTIL APPLIANCE IS COOL.
FOR SAFE AND PROPER OPERATION OF THE APPLIANCE, FOLLOW THE VENTING INSTRUCTION EXACTLY.
TO AVOID DANGER OF SUFFOCATION KEEP THE PACKAGING BAG AWAY FROM BABIES AND
CHILDREN. DO NOT USE IN CRIBS, BED, CARRIAGES OR PLAY PENS. THIS BAG IS NOT A TOY.
Vertical installations may display a very active flame. If this appearance is not desirable, the exhaust outlet may
be restricted with a Wolf Steel approved restrictor kit. This kit is not recommended for short vertical vent runs.
Depending on the model and/or year of your appliance, mounting holes may not exist.
If mounting holes exist, remove the screws from the firebox top, align the restrictor plate as illustrated
A.
and secure.
If mounting holes do not exist, align the restrictor plate as illustrated and secure using the two #8x1/2
B.
hex head sheet metal screws supplied.
Ensure the plate will pivot at the slot up into the exhaust outlet.
C.
Depending on the amount of restriction desired, the restrictor plate can be left flat for most restriction or
D.
bent up for varying degrees of restriction.
MOUNTING
SCREWS
#8 x ½ HEX HEAD
WARNING
!
KNOT BEFORE THROWING AWAY.
FIREBOX TOP
RESTRICTOR
EXHAUST COLLAR
SHEET METAL
SCREW
1. MOST RESTRICTION
2. MODERATE RESTRICTION
3. LEAST RESTRICTION
TOP VIEW
RESTRICTOR
3
2
1
FIREBOX TOP
31
EN
W415-1678 / B / 03.27.17