Cleaning Your Fryer; Reset Function - Moulinex Fry Expert Mode D'emploi

CLEANING
EN
Filtering the oil
 Remove any small pieces of food with a non-metallic skimmer - 16. Small crumbs that break off food tend to burn and
affect the quality of the oil/fat quickly. Therefore, filter the oil/fat after each use to lengthen the frying life of the oil/fat.
 You may store the oil in the fryer, or in a separate airtight container.
 Solid vegetable fat should not be stored in the fryer.
 Do not pour used frying oil/fat down the drain. Allow to cool completely and dispose according to local waste
regulations.
Notes
- Leave the fryer (and the oil/fat in the bowl) to cool completely before filtering the oil/fat (3 hours).
- We recommend changing the oil/fat after every 8 to 10 uses.

Cleaning your fryer


Always unplug your fryer and allow it to cool completely before cleaning (at least 3 hours).
 Remove the lid by opening the lid, press on the clips at the back of the lid, and lift up to release
 Remove the basket, the filter support, the control panel and the bowl. To remove the bowl, use the integrated
carrying handles - 2.
 To remove the filter support, hold the control panel with one hand and pull the filter support out with the other
hand.
 Remove the anti-odor filter by turning the filter towards the right to the
 The bowl, the lid, the filter support (without the anti-odour filter) and the basket can be washed in the dishwasher
4 - or with a sponge and warm water with washing-up liquid.
 The control panel and the housing can be washed with a damp cloth.
 Dry all parts thoroughly.

o replace the anti-odour filter: place the filter on the filter support and turn it towards the left to the
 Replace the bowl, the control panel
hinges until you hear a "click" and close the lid.
Caution
- We recommend washing the lid after each use to maintain perfect visibility during frying.

RESET function

 Your appliance is equipped with a safety feature that shuts off the fryer if it is turned on without filling the bowl with
oil. If the safety feature is activated, the fryer will shut off automatically and the power indicator light will turn off.
 If the safety feature is activated, unplug the appliance and let it cool. Fill the bowl with oil, then remove the control
panel unit (F) and press the small RESET button (S) on the back of the control panel with a toothpick or similar non -
metallic object. Plug in the appliance again and continue frying. If you continue to have issues with the safety feature,
see page 13 for information on how to contact Customer Service.
Changing the anti-odour filter
 Your appliance is equipped with a long lasting anti-odor carbon filter. For efficient anti-odor filtration, change your
filter at least every 20 uses.
 To change your filter:
- Allow your fryer to cool completely.
- Remove the lid by opening the lid, pressing on the clips at the back of the lid, and lift to release
- To remove the anti-odor filter, turn the filter on the right towards the
- Dispose of the old filter.
- Remove the new filter from the packaging, place the filter on the filter support, and turn towards the left to the position
- 5.
Note: the model number for the replacement filter is XA500050 (KRUPS).
- 6, the filter support - 7,
1 2
position and pull it away
the basket and the lid. To replace the lid, insert the
position and pull it away
- 1.
- 17.
-
T
position - 5.
- 1.
- 17.