Ego Power+ CHV1600 Guide D'utilisation page 17

HANGER
The hanger is designed for hanging the
charge connector. It can be placed in two
positions (Fig. 3). The lower position is for
hanging the charge connector (Fig. 1). The
higher position is for convenient storage.
WALL-MOUNT HOLES
The charger has four hanging holes for
convenient storage (Fig. 4). Install four
screws on the wall 12 inches (305 mm)
apart horizontally and 6 inches (152.4
mm) apart vertically to hang the charger.
Use screws sufficiently strong to hold the
charger.
WINDING GROOVE
When the charger is hung on the wall,
there will be a groove towards the back
of the charger. The groove can be used as
a winding groove. Wind the power cord in
the winding groove if it is too long to use
conveniently (Fig. 5).
56V CHARGER ELECTRIC ZERO TURN MOWER 1600W CHARGER — CHV1600/CHV1600-FC
3
4
12 in. (305 mm)
6 in.
(152.4 mm)
5
Wall-mount Hole
Winding Groove
17