Orientation Of The Camera; Power Supply - Abus HDCC62500 Notice D'utilisation

3.2. Orientation of the camera

HDCC62500
The camera module can be oriented in three axes.
HDCC72500
The camera module can be oriented in three axes.

3.3. Power supply

IMPORTANT!
Before starting installation, ensure that the power supply voltage and the rated voltage of
the camera are identical.
The cameras require a 12 V DC power supply. The polarity of the DC voltage supply must be observed!
1: Fixing screw (rotation)
2: Fixing screw (tilt)
3: Fixing ring (turn)
Unscrew the locking ring in an
anti-clockwise direction and align
the housing and camera module
for orientation. Then fix in place
by screwing the locking ring back
on in a clockwise direction.
12 V DC, barrel connector, 5.5 x 2.1 mm
37
English