Torqueedo Cruise 2.0 Mode D'emploi page 18

Battery
cable set
Connection of Cruise 2.0 to two 12 V batteries
• Serial and parallel configured batteries must always have the same charge
• Make sure the battery poles are clean and corrosion-free.
• To fix them to the battery poles, tighten the screws on the terminals
18
Operating instructions
condition. That is why you must use only the same type of batteries in
configurations (same capacity, same age, same manufacturer, same
charge condition) and fully charge each battery separately in your
charger before you connect it up. Differences in the charge condition can
lead to extremely high compensatory currents or overloads that overload
the cables and connectors or the battery itself. In extreme cases, this can
cause fires and injuries.
securely.
12 V battery
12 V battery
Optional expansion of the
battery capacity with parallel
configuration using additional
12 V battery pairs.