Before Using - FLAVIA SB100 Guide Utilisateur

Safety Precautions
Electrical supply and cord
Never do anything that might cause damage to the
cord or plug,
such as modify them, place hot or heavy objects on
them, bend them, stretch them, or twist them.
If the appliance is used when damaged, electrical short
circuit or fire may result.
• If in need of repair please contact your local Flavia
Drinks Systems supplier.
Clean the plug from dust regularly
A build-up of dust on the plug will attract condensation,
which could cause cable damage resulting in fire.
• Remove the plug and clean with a cloth.
Precaution against burns
Where to position the appliance
Do not place on unstable surfaces or surfaces that
can be affected by heat
The appliance may topple over causing burns.
Do not open the lid while heating water
Steam can cause burns.
Do not touch when the lid is open
This may cause burns.
Do not
touch
Do not touch the steam vent
This may cause burns. Take special care to prevent children
from touching the steam vent.
Do not
touch
Keep Hands clear whilst beverage is being dispensed.
When carrying the appliance do not touch the lid
handle
The lid may open causing burns and other injury.
Remove the plug from the socket when the
appliance is not in use
Deteriorating insulation may result in electric
Remove
the plug shock and/or fire.
Please observe these precautions fully
Make sure the plug is correctly inserted in the power
socket
An unsafe plug may cause electric shock or generate heat
resulting in fire.
• Do not use a damaged plug or loose power socket.
15A/230V socket must not be used with other
a p p l i a n ce s
®
When used alongside other appliances, heat generated may
result in fire.
• The cord extension of 15A must not be used with other
appliances.
Never plug or unplug the appliance with wet
hands
No wet
This may result in electric shock.
hands
Attention
Do not place near walls or furniture
Steam and heat could damage walls and furniture, causing
a change in colour and shape.
During use
Do not remove cup while the beverage is being
dispensed
This may cause burns.
Do not move the appliance when a cup is still on
the cup stand
This may cause burns.
Do not touch the hot parts of the appliance during
use and for a short period after use
This may cause burns.
Do not
touch
After use
Wait for the appliance to cool before moving it
A hot appliance may cause burns.
• Take special care when disposing of unused hot water.
• Remove separator only after it has cooled.
Power cord
When unplugging the appliance, pull by
the plug – not the cord!
Electric shock and short circuit may result in fire.
3

Before using

Using the appliance for the first time or after a long time
Please clean the tank and water contact parts
How to install
Push the drip tray in until a click
is heard.
How to insert the mesh filter
Push onto the pipe at the bottom
of the tank until a click is heard.
Insert the separator inside the tank
How to insert the separator into the tank.
When inserting the separator
inside the tank avoid touching
the lip.
Tank lip
Once past the lip, bring the
separator into a horizontal
position.
Align the separa tor indent
b e low the marker inside the
ta n k .
Mark inside
tank
Indent
Turn the separator to the
right until you hear the
Marker catch click.
Then fix the
marker into
the indent on
the other side.
Remove the separator, turn it to the left and
remove in the reverse order.
Fill the tank with water up to the maximum
water level mark
• As water enters the separator,
you will here the sound of
air escaping.
Tank
Maximum
water level
Plug in the appliance, switch the
power switch to the ON position
and heat water.
Light comes on
when water has
heated
Switch off the appliance and leave to cool.
Remove the lid and drip tray
How to remove the lid.
Pull diagonally away Hold down the
securing catch.
by pressing the 'pips'
in the lid handle. Remove the lid
by pulling by the lid
handle.
Securing catch
Lid
handle
To replace, push diagonally in.
When closing, push into position until you hear a click.
How to remove
the drip tray.
Hold firmly and
pull out.
Dispose of any remaining
hot water through the drain
Notice
• Make sure to remove the drip tray before disposing of
unused hot water (Water contained in the drip tray can
come into contact with internal electric parts resulting in
malfunction).
Notice
• Do not use the appliance near a • Do not leave unused heated
source of fire (this may result in water in the appliance (doing so
deformation of the casing). may result in corrosion to the
tank and in an unpleasant
• Make sure that the separator is
odour).
properly inserted in the tank
• Do not dispose of unused water
(when not properly inserted, the
on the side of the control panel.
separator may fall out when
disposing of unused water. Also, Always use the drain (not doing
so can result in malfunction).
heated water may become
tepid).
• Empty drip tray reqularly. Use
• Do not fill with water directly
caution when emptying, possible
from the tap (water may
hot contents.
overflow coming in contact with
internal electrical parts, which
may result in malfunction).
4