Use; Care And Daily Cleaning - Bosch MMBP1 Série Mode D'emploi

en

Use

Use
W Risk of injury!
– Do not insert the mains plug until all
preparations for working with the appli-
ance are complete and the required
attachments are assembled correctly
and connected to the base unit.
– Never process food that is hotter than
50°C in the plastic blender jug.
– Handle the blade insert with care, and
don't put your hand between the blades.
X Fig. B
■ Place the base unit on a stable and level
work surface.
■ Completely unwind the mains cable.
Using the to-go or chopper
blender jug
X Fig. C
1. Put the desired ingredients into the
blender jug.
2. Hold the blade insert by the plastic
ring and insert it – blade first – into the
blender jug. Turn the blade insert anti-
clockwise until it audibly clicks into place.
3. Turn the blender jug over.
4. Insert the blender jug into its recess on
the motor block and turn it clockwise
until it audibly clicks into place.
5. Plug the mains plug into the mains.
6. Hold the blender jug firmly with one
hand. Hold down the t or u button until
the mixture has reached the desired
consistency.
7. Release the button and wait until the
appliance comes to rest. Disconnect the
mains plug.
8. Turn the blender jug anti-clockwise and
then remove it.
9. Turn the blender jug over.
10. Turn the blade insert clockwise and then
remove it.
Caution!
Never set the blade insert down with the
blade underneath. This could damage
the blade and scratch your work surface.
X Fig. B
12
11. Close the jug with the lid.
12. To pour out or drink contents, undo screw
cap and remove, or lift up drinking cap.
Clean all the parts. X "Care and daily
cleaning" see page 12

Care and daily cleaning

The appliance and all the attachments
and accessories used must be thoroughly
cleaned after each use.
W Risk of electric shock!
– Unplug the appliance before cleaning it.
– Never immerse the base unit in liquids
and do not clean in the dishwasher.
– Do not use a steam cleaner.
W Risk of injury!
Do not touch the blender blades with your
bare hands.
Caution!
– Do not use any cleaning agents
containing alcohol or spirits.
– Do not use any sharp, pointed or metal
objects.
– Do not use abrasive cloths or cleaning
agents.
Notes:
– It is best to clean the parts immediately
after use. This will prevent residues from
drying on and possibly attacking the
plastic (e.g. essential oils in herbs).
– Pour a little water and washing-up liquid
into the empty blender jug and hold
down button u for a few seconds.
– The plastic parts may become dis-
coloured when you process certain ingre-
dients, such as carrots, but this can be
removed with a few drops of cooking oil.
In Fig. D you will find a summary of how to
clean the individual parts.
Base unit
Wipe the outside of the base unit with a
soft, damp cloth and dry off.