Troubleshooting - Amibot Swip AS70 Manuel De L'utilisateur

Troubleshooting

Problem
• The water tank is not
attached correctly.
• The clean water tank
is empty or it is not
attached correctly.
• The used water tank
is full.
• The robot does not
move correctly.
• The main brush is
blocked.
• The wheels have
stopped rotating.
• The gap sensors have
stopped detecting
gaps.
• The robot is not on the
floor.
Weak battery.
The used water tank has a
leak.
Indicator lights Solution
•
: Red
: Red •
: Orange •
•
•
: Red
: Orange •
•
•
: Red Charge the robot's battery.
No indicator Check the tank's air inlet and
light. clean the drip nozzles.
19
Check that the water tank
is attached correctly.
Check the clean water tank.
Check the used water tank
and empty it.
Make sure there is a space
of at least 50 cm to the
sides and rear of the robot.
Unclip the main brush,
clean the brush holder and
the robot's two cavities.
Check if the wheels are
dirty.
Check and clean the gap
sensors.
Place the robot on the
floor.
EN