Switching On The Sound (Optional); Switching On The White Led Light Under The Edge Of The Tub (Optional); Cleaning And Maintenance; Disinfecting The Whirlpool System - DURAVIT Jet-System Notice D'utilisation

5.5 Switching on the sound (optional)

Prerequisite: Bluetooth-capable audio source with protocol.
A2DP
> Switch on the main switch; the Bluetooth mode is activated.
> Activate the Bluetooth mode on your audio source as described in its operating
instructions.
> Search for the "Duravit" Bluetooth device and establish a connection to it.
> Enter the activation code: "2412".
> Select music and adjust the volume on your audio source.
5.6 Switching on the white LED light under the edge of the tub
(optional)
> Touch the Duravit logo.

6. Cleaning and Maintenance

Note!
Damage to the surfaces through the use of the wrong cleaning fluids or detergents.
• Only use a cleaning fluid that is recommended by Duravit.
• Never use abrasive, aggressive or chemical cleaners.

6.1 Disinfecting the whirlpool system

How often?

Disinfect the whirlpool system before using it for the first time, and then after every
tenth bath, but at least one a month and after a long period of no use.

How?

CAUTION! Chlorine bleach irritates the skin.
> Observe the safety instructions on the disinfectant.
> Do NOT bathe in the whirlpool tub while disinfecting it.
> Ensure that the room is well-ventilated during the disinfection process.
23