Switching On The White Led Light Under The Edge Of The Tub (Optional); Turning The Button Vibrations On/Off; Cleaning And Care - DURAVIT Combi-System L Notice D'utilisation

> Press the "Light" button until it flashes.
Setting buttons are now activated and illuminated.
> Press the „-" or „+" buttons.
Colour shift duration decreases or increases.

6.8 Switching on the white LED light under the edge of the tub (optional)

> Touch the Duravit logo on the edge of the tub.

6.9 Turning the button vibrations on/off

Prerequisite: Display turned off.
> Press the " " for 10 seconds.
The " " button illuminates.
> Press the " " button again.
"On/Off" button illuminates.
> Press the "On/Off" button.
> Press the " " for 2 seconds.
Button vibrations are turned on/off.

7. Cleaning and care

NOTICE
Abrasive, aggressive or the wrong cleaning agents may damage the surface and lead
to discolouration.
> Use cleaning agents recommended by Duravit (see table 1) as well as a soft cleaning
cloth.
Spray can penetrate into very small openings and gaps and damage the surface.
> Spray the spray cleaner onto the cleaning cloth and not directly onto the product.
If the cleaning is not carried out regularly enough, soiling may become more difficult
to remove.
> Regularly clean the surface and clean immediately if soiled.
Complaints due to improper cleaning and care will not be covered by the warranty.
33