Publicité
Suzuki Grand Vitara - short chassis
09/2005 - ....
Ref. 1543
Fitting instructions
1)
Permanently disassemble the towing ring at the right side of the vehicle. Make an incision at the bottom
of the bumper according to figure 1.
2)
Place the tow bar against the bottom of the chassis beam with points (A) and (B) on the provided screw-
thread holes. Insert bolts and washers by points (A) and fasten with bolts.
3)
Insert mounting pieces (1) and (2) with points (B) on points (B) of the tow bar and with points (C) against
the outside of the chassis beam matching the provided screw-thread hole. Insert bolts and washers and
fasten firmly with bolts (see tension).
4)
Assemble the ball together with the security ring, insert bolts and fasten firmly (see tension).
When the ball in not in use, remove it. The ball may not hinder the number plate.
Composition
Tow bar reference:1543
1 ball T43XL00
4 bolts M12x40 - DIN933
12 washers M12 - DIN128A
1 towing ring (800000)
1 socket holder P03
2 nuts DIN931 - M12
6 bolts DIN961 - M12x1,25x35x
8 washers 13x24x2,5
2 bolts DIN960 - M12x1,25x50
2 mounting pieces (1) and (2)
2 caps 60x60x5mm
All bolts and nuts : quality 8.8
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*-*')
(*-*')
(*-*'-A-B-C)
(*')
(*)
(*-*')
(A-C)
(A-B-C)
(B)
(B)
Publicité
