Kenwood DNX210EX Manuel D'installation page 7

For Toyota/Scion
1. Refer to the section <Removing the
Hard Rubber Frame> and then remove
the hard rubber frame.
2. Cut out accessory 7 as illustrated.
3. Fold double-sided adhesive (accessory
8) along the slit and attach it to
accessory 7 cut-out against the
center rib as illustrated. Use 2 pieces
of accessory 8 for 1 accessory 7 cut-
out.
4. Attach accessory 7 cut-out to the unit.
Accessory 8
Cutting line
Accessory 7
|
7
English