Service Programmes - Bosch TES 803F Série Mode D'emploi

en
● Remove the cover 20b of the brewing unit
and rinse the brewing unit 20 thoroughly
under running water.
● Thoroughly clean the brewing unit sieve
under the running water.
Important: Clean the brewing unit with-
out detergent and do not put it in the
dishwasher.
● Wipe out the inside of the appliance
thoroughly with a damp cloth and remove
any coffee residues.
● Allow the brewing unit 20 and the inside
of the appliance to dry.
● Replace the cover 20b on the brewing
unit and reinsert the brewing unit 20 fully
into the appliance.
● Press the eject lever 21 up fully.
● Slide the red lock 20a fully to the right
and close the door 19.
44

Service Programmes

Tip: Refer also to the quick reference guide
in the storage compartment 22.
At regular intervals, the display 5 shows the
following texts:
Short rinse milk system
Service - Descale
or
Service - Clean
Service - Calc'nClean
The appliance should be cleaned or
descaled immediately using the corre-
sponding programme. You have the option
of combining the processes
and with the
Cleaning
function (see " Calc'nClean"). If the service
programme is not run as instructed, the
appliance may be damaged.
¡ Warning!
Follow the instructions for using the descal-
ing and cleaning agents for each service
programme. Never interrupt the service
programme!
Do not drink the liquids.
Never use vinegar, vinegar-based products,
citric acid or citric acid-based products.
Never put descaling tablets or other descal-
ing agents in the powder compartment 18.
Before starting the respective service
programme (descaling, cleaning or
Calc'nClean), remove the brewing unit,
clean as instructed and replace.
Specially developed and suitable descal-
ing and cleaning tablets are available
from retailers or customer service (see
"Accessories").
or
or
.
Descaling
Calc'nClean