Technical Data - Topcom BABYTALKER 3000 SEDS Manuel D'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
Babytalker 3000 SEDS
– Ensure both units are switched on.
– Unplug the AC mains adapter of the baby unit from the mains socket and remove the batteries from the
parent unit.
– Press the baby unit On/Off switch
mains socket.
The baby unit will start up in registration mode.
– Release the On/Off switch
– Press the parent unit On/Off button
The parent unit will start up and the three red volume LEDs
– Registration mode will end after successful registration or after 60 seconds.
The night light
The 3 red parent unit LEDs
– You will hear a long beep if registration is successful or three short beeps if it is not.
Checking the link between the parent and baby units:
– Press and hold the paging button
– In response, the parent unit will emit a high-pitched tone for 30 seconds.
– Briefly press the On/Off switch
12
Storage and disposal instructions
We recommend that you keep the box and packing materials so you can use them to
transport the equipment in the future if necessary.
12.1 Storage
Remove the batteries (standard or rechargeable) from the parent unit and the baby unit.
Store the equipment in a dry location.
12.2 Packaging waste disposal
The packaging consists of environmentally-friendly materials that can be disposed of with your local
waste collector for recycling.
12.3 Waste disposal (environmental protection)
Dispose of the equipment in accordance with the provisions of European Directive 2002/96/EC on
waste electrical and electronic equipment (WEEE). Contact your local authority waste disposal
department for information.
Dispose of batteries (standard or rechargeable) in an environmentally friendly manner in
accordance with local regulations.
13

Technical data

Frequency
Range
Operating temperature
Parent unit
Rechargeable batteries
AC mains adapter
Dimensions
Weight
and hold it down while plugging the AC mains adapter into the
4
. The night light
4
and hold it down while fitting charged batteries.
15
on the baby unit will stop flashing.
will go out.
11
on the baby unit for 2 seconds.
5
on the parent unit to switch off the tone.
15
1,880 GHz to 1,900 GHz
Outdoors: up to 600 m / up to 300 m in SEDS mode
Indoors: up to 50 m / up to 25 m in SEDS mode
15 °C to 35 °C
20 % to 75 % relative humidity
Brand: GP
Type: GP80AAAH2BX
Battery pack 2.4V 800mAh NiMH (included)
Brand: Kings
Type: KSS05-060-0300G
Input: 230V AC / 50Hz / 150mA
Output: 6V DC / 300mA
approx. 117 x 62 x 72 mm
98 g (without rechargeable batteries)
on the baby unit will flash for 60 seconds.
will flash. Release the On/Off switch
11
.
15
9

Publicité

Table des Matières
loading

Table des Matières