Important; Cleaning And Maintaining The Device; Storage - Beurer TL 100 Mode D'emploi

6 Things to consider
We recommend a distance of between 10 and 40 cm from the face to the light during application.
The duration of the application depends on the distance:
Lux Distance
10.000 approx. 10 cm
5.000 approx. 25 cm
2.500 approx. 40 cm
In principle,
the closer you are to the light source, the shorter the application time.
7 Enjoying the light over longer periods
Repeat application on at least seven consecutive days during darker periods of the year, or for longer
depending on your individual needs. Application should take place during the mornings where possible.
8 Switching off the light
 Press the on/off button. The LEDs switch off. Unplug the mains part from the mains socket.

Important!

The light remains hot after use. Allow the light to cool down sufficiently before putting it away and/or
packing it away.
9 Mood light with change of colour
In addition to the normal daylight, the daylight therapy lamp TL 100 also features a moodlight with chan-
ge of colour.
 Press and hold the on/off button for 2 seconds. The moodlight with change of colour will switch on.
As with the normal daylight, the moodlight also features a timer and brightness adjustment. To switch
off the moodlight with change of colour, press and hold the on/off button again for 2 seconds.
 If you wish to have a coloured light permanently displayed while the colour-change operation is in pro-
gress, briefly press the on/off button. Press the on/off button again to switch off the permanent coloured
light.

8. Cleaning and maintaining the device

The device should be cleaned from time to time.
Important
• Ensure that no water gets inside the device.
The device must be switched off, disconnected from the mains and allowed to cool down each time be-
fore cleaning.
• Do not clean the device in a dishwasher.
Use a slightly damp cloth to clean the device.
• Do not use any abrasive cleaning products and never submerge the device in water.
Do not touch the device with wet hands when it is plugged in and do not allow water to spray on the de-
vice. Only operate the device if it is completely dry.

9. Storage

If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out
of the reach of children.
Follow the storage instructions provided in the „12. Technical specifications" chapter.
• It takes about 30 mins. from the lowest storage ambient temperature of - 20 °C to resume normal operation at
an ambient temperature of 20 °C.
• It takes about 30 mins. from the highest storage ambient temperature of 50 °C to resume normal operation at
an ambient temperature of 20 °C.
Application duration
0,5 hour
1 hour
2 hours
16