Mobicool MVA Notice D'utilisation page 10

Safety instructions
!
CAUTION! Failure to obey these cautions could result in minor
or moderate injury.
Electrocution hazard
 Before starting the cooling device, ensure that the power supply
line and the plug are dry.
 Disconnect the cooling device from the power supply
– before each cleaning and maintenance
– after every use
Health hazard
To avoid contamination of food, please respect the following
instructions:
 Please check if the cooling capacity of the device is suitable for
storing the food or medicine you wish to cool.
 Food may only be stored in its original packaging or in suitable
containers.
 Opening the cooling device for long periods can cause signifi-
cant increase of the temperature in the compartments of the
device.
 Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
 If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mould developing within the
device.
A
NOTICE! Damage hazard
 Check that the voltage specification on the type plate
corresponds to that of the energy supply.
 Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the
vehicle
– Or with the AC connection cable to an AC power supply
 Never pull the plug out of the socket by the cable.
 If the cooling device is connected to a DC outlet: Disconnect the
cooling device and other power consuming devices from the bat-
tery before connecting a quick charging device.
10
MVA (TC36)
EN