Technical Data - Bosch GIS 1000 C Professional Notice Originale

20 | English
(11) Right-hand arrow button
(12) On/off button
(13) Down arrow button/zoom out
(14) Light on/off button
(15) Left-hand arrow button
(16) Up arrow button/zoom in
(17) Left-hand function button
(18) Display
(19) Protective cap for humidity and ambient temperat-
ure sensor
(20) Carrying strap lug
(21) Protective cap for infrared reception lens
(22) Camera
(23) Infrared beam reception lens
(24) Light
(25) Type K connection for thermocouple
(26) Micro USB port
A)
(27) Battery adapter cover
A)
(28) Battery adapter cap
(29) Battery bay
A)
(30) Battery
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Display elements (see figure A)
(a) Date/time (see "<Time & Date>", page 27)
(b) Measuring frame (see "Measured area for surface
temperature measurements", page 23)
(c) Status indicator:
Measuring tool is ready to measure; press
the measure button (4).
(Continuous) measurement in progress;
lasers are switched on.

Technical Data

Infra-red thermometer
Article number
Working range
Measuring range
– Surface temperature
– Contact temperature
– Ambient temperature
– Relative air humidity
A)
Measuring accuracy
B)
Surface temperature
–40 to –20.1 °C
–20 to –0.1 °C
1 609 92A 4X3 | (03.11.2020)
Measurement complete, lasers are
switched off, measurement results are
fixed.
Contact temperature mode, lasers are
deactivated, measurement taken only via
thermocouple.
(d) Zoom level display (see "Setting the zoom level",
page 24)
(e) Bluetooth® display switched on (see "Data transfer
via Bluetooth®", page 26)
(f) Battery charge indicator
(g) Function indicator/measured value for relative hu-
midity
(h) Function indicator/measured value for ambient tem-
perature
(i) Function indicator/result for dew point temperature
(j) Minimum/maximum measured value for surface tem-
perature during a measurement
(k) Result scale
(l) Menu symbol
(m) Surface temperature alarm display (see "Surface tem-
perature alarm", page 25)
(n) Measured value
(o) Current mode
(p) Mark for measured value or result (depending on se-
lected mode)
(q) Gallery symbol
(r) Function indicator/measured value for average tem-
perature
(s) Function indicator/measured value for contact tem-
perature
(t) Emissivity/reflected temperature indicator
(u) Set external temperature
(thermal bridge mode)
(v) Display of f value with tolerance
Rsi
(thermal bridge mode)
GIS 1000 C
3 601 K83 302
0.1–5 m
–40 to +1000 °C
–40 to +1000 °C
–10 to +50 °C
0 to 100 %
±2.5 °C
±1.5 °C
Bosch Power Tools