Choosing The Installation Site - VHF N4+ Mode D'emploi D'origine

N4+ – Installing the machine

5.2 Choosing the installation site

The installation site must meet the following criteria:
Firm and even surface, must be able to carry the
n
weight of the machine.
Alternating current source.
n
An operational Residual Current Device / Ground
n
Fault Circuit Interrupter on the electric circuit of
the machine.
Machine requires an external compressed air sup-
n
ply.
Access to the internet and local computer network
n
via cable.
You can find specific values and additional require-
ments in the chapter on technical data.
data – on page 13
Distances to maintain
maintained
If you do not maintain the safety distances, the
movable parts of the housing can collide with
obstacles when being opened and get damaged. If the
ventilation openings are covered, the machine may
overheat and get severely damaged.
Technical

F
Original Operating Instructions: N4+
Version: 12/16/2021
Damaging of the machine if
NOTICE
safety distances are not
Ensure that the following safety distances are always
maintained.
. 8 D
IG ISTANCES TO MAINTAIN
EN 15