Installing The Machine; Checking The Scope Of Delivery; Choosing The Installation Site - VHF K4 Mode D'emploi D'origine

4

Installing the machine

4.1 Checking the scope of delivery

M Unpack the machine and ensure you have received the
following items:
1
3 4
7 8
11 12
2
5 6
9 10
13
Original Operating Instructions: K4 edition
Document version: E – 02/2020
[1] 1 Machine K4 edition
[2] 1 spindle service set
[3] 1 power supply cord
[4] 1 USB cable
[5] 1 service unit for compressed air
[6] 1 hex key (3 mm) for the blank change
[7] 1 drill bit (2.8 mm) for tool positions
[8] 1 calibration set: 1 micrometer, 3 discs,
1 calibration tool
[9] 1 measuring pin
[10] 1 key for the emergency release of the working chamber
door
[11] 1 hose connection for the external air extraction system
[12] 1 pneumatic hose (0.5 m length)
[13] 7 tool magazine inserts (as spare parts)
Without illustrations:
This document
„
h Please keep the machine packaging for future transport.

4.2 Choosing the installation site

The installation site must meet the following criteria:
Firm and even surface, must carry the weight of the
„
machine
Ambient temperature (storage / transport): between
„
-20 °C (-4 °F) and 60 °C (140 °F)
Ambient temperature (operation): between 10 °C
„
(50 °F) and 32 °C (90 °F)
Relative air moisture maximum 80 %, non-condensing
„
Machine location must be dust-free
„
Alternating current source with 100 – 240 V and 50/60
„
Hz, max. 300 W
Compressed air supply that meets the requirements of
„
the machine ( chapter 4.4, page 13)

Sufficient space at the sides of the machine
„
( page 10)

Installing the machine
11