Dimension Drawings - Gurari GCH F 462 Manuel D'installation Et D'utilisation

Parts of the hood
The extractor hood consists of the following parts

Dimension Drawings

Assembly
1. examination
Before starting the actual installation, the device should be checked. In addition to the control of
externally recognizable damage, a function check has to be done. Take out the device from the
packing, get rid of all packing materials and put the device with the back on the floor / table. After
connecting to a power supply, the lighting as well as the function of each stage should be checked.
Please take care that exhaust outlet is open through check.
1. Wall bracket
2. Upper chimney cover
3. Lower chimney cover
4. Flue transition duct
5. Hood body
6. Power cord and plug
7. Grease filter
8. Lightning
9. Controls