Table des Matières
Publicité
3
Description of the supported OIDs
3.1
Sysdesc, Syslocation, SysName
OID SNMPv2-MIB::sysDescr.0 : Type of product and firmware version
•
•
OID SNMPv2-MIB::sysLocation.0 : Parameter "syslocation" in the web page
OID SNMPv2-MIB::sysName.0 : Parameter "sysname" in the web page
•
3.1.1
Example
mc@ubuntu:~$ snmpget -v1 -c public 192.168.0.201 SNMPv2-MIB::sysName.0
SNMPv2-MIB::sysName.0 = STRING: XS+
mc@ubuntu:~$ snmpget -v1 -c public 192.168.0.201 SNMPv2-MIB::sysDescr.0
SNMPv2-MIB::sysDescr.0 = STRING: ETIC Telecom XSLAN+4400 SHDSL switch, firmware
version v2.1.0-b2
3.2
Network interfaces table (IF-MIB::ifTable)
List of the network interfaces of the device.
The XS can have up to 8 Ethernet interfaces :
4 10/100BASE-T Ethernet ports,
•
•
4 SHDSL 2BASE-TL ports.
The interfaces are named :
•
lan1, lan2, lan3, lan4 for the 10/100BASE-T interfaces (from 1 to 4)
sh1, sh2, sh3, sh4 for the SHDSL interfaces (from 1 to 4).
•
•
The br_lan and br_sh interfaces are Linux bridge interfaces. They allow Ethernet bridging between the
ports of the device.
In this table there are a few particularities :
OID IF-MIB::ifAdminStatus : Display the administrative state of the interface.
•
Warning : For the SHDSL ports, the value ifAdminStatus is « up » when the connection is established,
•
and « down » otherwise.
OID IF-MIB::ifOperStatus : Is « up » when a connection is established, or « down » when were is no
•
connection. This is true for the SHDSL and LAN ports.
OID ifIndex : Index of the interface, used in many tables of the product.
•
OID ifSpeed : Data rate of the interface. Note: for the SHDSL ports, this value is always 100Mb/s.
•
3.2.1
Example
mc@ubuntu:~$ snmptable -v1 -c public 192.168.0.201 IF-MIB::ifTable
SNMP table: IF-MIB::ifTable
...
DOC_DEV_XS_Guide de configuration_C
ANNEXE 1
page 77
Publicité
Table des Matières
