Declaration Of Conformity - Etic Telecom XSLAN+ Guide Utilisateur

The manufacturer, ETIC Telecom – 13 chemin du vieux chêne – 38240 Meylan – France, Hereby declares
under sole responsibility that the listed products conform to
- the Electromagnetic Compatibility (EMC) Directive 2014/30/UE ,
- the Low Voltage Directive (LVD) 2014/35/UE ,
- the Restriction of the use of certain Hazardous Substances (RoHS) Directive 2011/65/UE.
Type of product:
Models:
XSLAN+140
XSLAN+1400, XSLAN+1220, XSLAN+1230, XSLAN+1260, XSLAN+1261
XSLAN+2400, XSLAN+2220, XSLAN+2230, XSLAN+2260, XSLAN+2261
XSLAN+BP2400, XSLAN+BP2220, XSLAN+BP2230, XSLAN+BP2260, XSLAN+BP2261
XSLAN+4400, XSLAN+4220, XSLAN+4230, XSLAN+4260, XSLAN+4261
The harmonized standards to which these products comply are:
Standard
EN 61000-6-2 2006
EN 61000-6-4 2007
A1/2011
EN 60950-1/A2 2014
Date : 11th October 2017
Philippe Duchesne
Technical Director
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
DOC_DEV_XSLAN+_Guide utilisateur_B

DECLARATION OF CONFORMITY

SHDSL switch
Title
Immunity:
EN61000-4-2 Electrostatic Discharge
EN61000-4-3 RF Radiated Immunity
EN61000-4-4 EFT/Burst Immunity
EN61000-4-5 Surge Immunity
EN61000-4-6 RF Conducted Immunity
EN61000-4-8 Power Frequency Magnetic Field Immunity
Emission:
EN55022 Radiated and conducted emission
Safety and Health
Page 3