Etic Telecom XSLAN Guide De Configuration page 80

ANNEXE 1
3.4.2 Table BRIDGE-MIB::dot1dBasePortTable :
This table provides details of the bridge ports. Throughout the BRIDGE-MIB, ports are referenced by number.
This table associates a bridge port number with ifIndex (network interface number).
• OID dot1dBasePort : Port number
OID dot1dBasePortIfIndex : Port index in the ifTable table
•
OID dot1dBasePortCircuit : Always 0
•
OID dot1dBasePortDelayExceededDiscards : Not supported
•
OID dot1dBasePortMtuExceededDiscards : Not supported
•
3.4.3 OID BRIDGE-MIB::dot1dTp
This oid gathers information on transparent bridges (= Ethernet switches).
3.4.4 Table BRIDGE-MIB::dot1dTpFdbTable
This table contains the MAC address table learned by the product.
OID dot1dFdbAddress : MAC address learned by the switch
•
OID dot1dFdbPort : Which port to send a frame with the destination MAC address above.
•
• OID dot1dFdbStatus : the state of the entry in the table: learned or fixed.
This table allows you to draw a "map" of the network and equipment connected to it.
3.4.5 RSTP and STP
The RSTP and STP system can be polled with the standard MIBs BRIDGE-MIB and RSTP-MIB. The RSTP-MIB is
published by the IETF in RFC4318.
Page 80
DOC_DEV_XS_Guide de configuration_C