Haussmann Xpert 5848003 DS1800 Manuel De L'utilisateur page 31

• Loosen and remove four socket head bolts and the
bearing bracket (See Figure 22).
Support de roulement
Figure 22 -
• Loosen the idler assembly bolt to release tension from
the drum drive belt.
• Loosen the two socket head bolts shown to release
tension from belts. The drum drive belt can be removed
and replaced at this time (See Figure 23).
Drum
Drive Belt
Socket
Head Bolt
Figure 23 -
Boulons à
tête creuse
Idler
Assembly
Socket
Head Bolt
• Use a pry bar to lift motor bracket to remove and
replace the feed drive belt (See Figure 24).
Pry Bar
Figure 24 -
• To remove and replace the variable speed belt, the
outer variable speed drive pulley must be removed.
Loosen and remove the socket head bolt washer and
pulley (See Figure 25).
Socket Head Bolt
Figure 25 -
• Reassemble in reverse order.
30
Feed Drive Belt
Pulley
Washer